| Files: |
-
Get Bonus Downloads Here.url
180 bytes
-
1 -Purpose and significance of instrumentation in biomedical applications.mp4
30.8 MB
-
2 -Components of a basic bioinstrumentation system.mp4
32.0 MB
-
3 -Biomedical engineering vs clinical engineering contexts.mp4
50.5 MB
-
4 -Types of physiological measurements biochemical, bioelectrical, biomechanical,.mp4
32.8 MB
-
5 -Case study Monitoring cardiovascular parameters using a portable Holter monitor.mp4
30.0 MB
-
1 -Definition and classification of transducers.mp4
40.0 MB
-
2 -Active vs passive transducers.mp4
40.1 MB
-
3 -Biosensor components biological recognition element, transducer, electronics.mp4
63.7 MB
-
4 -Enzymatic, immunological, and optical biosensors.mp4
48.6 MB
-
5 -Case study Glucose biosensors for diabetes management.mp4
25.2 MB
-
6 -Emerging biosensor trends wearable, flexible, and nanotechnology-enabled sensor.mp4
44.6 MB
-
1 -Origin and physiological basis of electrical signals in the body.mp4
32.2 MB
-
2 -Electrode types and placements surface vs needle.mp4
35.2 MB
-
3 -ECG lead configuration and interpretation of waveforms.mp4
32.4 MB
-
4 -EEG frequency bands (alpha, beta, delta, theta) and clinical significance.mp4
23.4 MB
-
5 -EMG signal characteristics and muscular diagnostics.mp4
29.6 MB
-
6 -Case study Diagnosing epilepsy using 21-lead EEG monitoring system.mp4
32.3 MB
-
1 -Need for signal conditioning noise, interference, and variability.mp4
26.7 MB
-
2 -Operational amplifiers in bioinstrumentation circuits.mp4
35.4 MB
-
3 -Filtering low-pass, high-pass, band-pass, and notch filters (5060 Hz).mp4
26.9 MB
-
4 -Signal amplifiers instrumentation, isolation, and chopper amplifiers.mp4
26.2 MB
-
5 -Analog vs digital conditioning workflows.mp4
28.1 MB
-
6 -Example Signal enhancement for fetal ECG detection in noisy environments.mp4
24.0 MB
-
1 -Hazards in biomedical equipment shock, leakage, burns.mp4
22.4 MB
-
2 -Macroshock vs microshock.mp4
22.8 MB
-
3 -Isolation techniques optical, transformer, and capacitive.mp4
23.0 MB
-
4 -Safety standards IEC 60601, ANSIAAMI, NFPA 99.mp4
23.1 MB
-
5 -Grounding and leakage current testing.mp4
18.0 MB
-
6 -Clinical example Implementation of isolation in an ICU patient monitoring syste.mp4
21.8 MB
-
1 -Telemetry fundamentals and historical development.mp4
28.9 MB
-
2 -Wired vs wireless patient monitoring.mp4
19.8 MB
-
3 -RF, Bluetooth, and Zigbee standards in medical applications.mp4
19.0 MB
-
4 -Battery life, latency, and data reliability trade-offs.mp4
20.5 MB
-
5 -Case study Wearable ECG patch for remote arrhythmia detection.mp4
30.4 MB
-
1 -Principles of sampling, quantization, and digitization.mp4
25.9 MB
-
2 -Nyquist criterion and anti-aliasing filters.mp4
22.9 MB
-
3 -AD and DA converters.mp4
31.7 MB
-
4 -Multichannel data acquisition systems (DAQs) in hospital networks.mp4
24.2 MB
-
5 -Example Portable DAQ setup for multi-signal capture during ambulatory studies.mp4
24.5 MB
-
1 -Modular vs integrated system designs.mp4
29.4 MB
-
2 -Calibration techniques one-point, two-point, NIST-traceable references.mp4
21.4 MB
-
3 -Drift, hysteresis, and linearity errors.mp4
35.4 MB
-
4 -Quality assurance and maintenance in clinical instrumentation.mp4
32.6 MB
-
5 -Case study Integrating pulse oximetry and capnography into a single anesthesia.mp4
31.4 MB
-
1 -Pressure sensors (e.g., for catheter-based applications).mp4
32.5 MB
-
2 -Flow sensors (Doppler, thermal, and electromagnetic types).mp4
28.0 MB
-
3 -Chemical sensors for pH, oxygen, and CO₂ detection.mp4
37.0 MB
-
4 -Optical sensors photoplethysmography and near-infrared spectroscopy.mp4
32.6 MB
-
5 -Case example Use of CO₂ sensors in respiratory monitoring for ventilator patien.mp4
26.6 MB
-
Bonus Resources.txt
70 bytes
|
1337x
Discussion